Kistler 9287C Series User Manual

Multicomponent Force Plate for Biomechanics Type 9287C…
2.2 ä-Conformity
The Force Plate Type 9287C… is conforming to ä direc-
tives according to the Declaration of Conformity enclosed
with this instruction manual.
2.3 How to Treat the Instrument
 The force plate may be used only under the specified
environmental and operating conditions
 Protect the signal output against dirt and do not touch
it with your fingers. When the connection is not being
used, cover it with the cap provided
 When the force plate is not in use, protect it by keeping
it in the packing case supplied
 When performing long-time measurements, make sure
that the temperature of the force plate remains as con-
stant as possible
2.3.1 With External Amplifier (Type 9287C)
 The insulation resistance is crucially important with pie-
zoelectric measurements. It must be around 10
14
Ω (but
at least 10
13
Ω)
 To obtain this resistance, all plug and socket connec-
tions must be kept meticulously clean and dry
 The insulation resistance can be measured with the in-
sulation tester Type 5493
 The connecting cable from force plate to charge ampli-
fier is highly insulating. Use only the proper cable
 Do not remove the connecting cable from the force
plate
Pag
e 6 9287C_002-462e-03.11

Kistler 9287C Series Specifications

General

Brand	Kistler
Model	9287C Series
Category	Measuring Instruments
Language	English