31 / 89 83000102.Ki
In particular, the following hazard warnings apply to the machine:
Table 10: Hazard warnings
ATTENTION! Work on the chiller must be carried out by properly qualified,
competent personnel!
The surfaces of pipes and components of the refrigerant and cold water
circuit and electrical equipment can be very hot during operation and even
for a while after.
The surfaces of pipes and components of the refrigerant and cold water
circuit and electrical equipment can be very cold during operation and even
for a while after.
ATTENTION! Pipes and components of the refrigerant and cold water circuit
are pressurised.
ATTENTION! Do not undo the system parts. Risk of injury on contact.
ATTENTION! Only use the specified liquids!
WARNING! The device frame as well as the housing have not been designed
for additional loads, which is why it is not permitted to enter or place any
additional loads on the components!
Do not enter No additional loads
w
To Next Page
Loading...
