67 / 89 83000102.Ki
10. Service
All service work may only be carried out by properly trained, competent personnel.
10.1. Maintenance
Reliable operation and a long service life for the entire system can be guaranteed by proper
maintenance.
The purpose of the maintenance is:
• to ensure that the machine operates reliably and without unexpected failures
• to plan further service work in order to minimise downtimes
An overview of the maintenance intervals as recommended by the VDMA is given in Appendix II. In
addition, the national regulations of the respective installation site must be followed.
Please note that the points listed represent the minimum maintenance required. By increased
monitoring, system reliability can be rnhanced. Please contact our service department at any time
about maintenance quotations / service agreements.
10.2. Fault correction
Troubleshooting and fault correction instructions are given in Appendix 0.
Our technical customer service can be reached around the clock and will assist you with all
service matters (maintenance, repairs, spare parts, etc.):
Europe Service Team
T +49 9228 9977 7190
E service@kkt-chillers.com
W www.kkt-chillers.com
USA Service Team
TF +1 866 517 6867
E support@kkt-chillersusa.com
W www.kkt-chillersusa.com
10.3. Spare parts
To ensure that the performance of your chiller is not impaired, we recommend that you only use
original spare parts purchased from KKT chillers. In this way you ensure the reliability and quality
of the machine. If you have any questions about spare parts, please contact our KKT chillers
Service Team (Table 1 Contact details).
To Next Page
Loading...
