61 / 89 83000102.Ki
Alarms that are preceded by the abbreviation DI refer directly to the digital input. All digital inputs
must be closed in a fault-free state. The abbreviation AI indicates a sensor error of an analog
input. The analog input must be checked for interruption and short circuit. Alarms without
abbreviations are formed internally in the control.
Figure 32: Alarm menu
8.6. Parameters
The parameters are divided into the three display and access levels:
• Customer, user
• Factory setting
A parameter can have a lower display level than access level. I.e. not all the parameters displayed
can be changed.
The specific parameter list for your application is enclosed with the unit.
To Next Page
Loading...
