44 / 89 83000102.Ki
5.3. Unpacking
Remove all straps, films, corner protectors and spacers carefully. Optional accessories may be
located under the film. Ensure that they are not damaged.
The packaging can be recycled according to the local regulations. Refer to the following table for
details of the packaging materials used:
Table 13: Materials in the packaging
5.4. Storage
If the chiller is stored for more than one month, it should remain in the transport packaging or be
repacked.
The following conditions must be noted for storage:
▪ Avoid direct sunlight and moisture
▪ Ambient temperature - 30°C to + 50°C
To avoid frost damage the cold water circuit must be completely drained before the chiller is
placed in storage and then flushed with a mixture of water and anti-freeze (see 11.1 Draining).
To Next Page
Loading...
