35 / 89 83000102.Ki
4.5. Personal protective equipment for servicing work
Servicing work on the machine includes all work for which the machine is opened and one or
more cladding panels are dismantled. In particular, this includes cleaning work in accordance
with Chapter 9 Cleaning and maintenance work in accordance with Chapter 10 Service. Before
work is carried out on the chiller the protective equipment described in Table 9: Definition of the
safety symbols must be used.
Table 11: Personal protective equipment for servicing work
4.6. Airborne sound emissions
The airborne sound emissions data is given as the sound pressure level, measured at a distance
of five metres without reflection. Its maximum value is shown in the technical data. This only
occurs at the highest fan speed at the air intake side of the chiller (Figure 9, measuring point [1]).
The emissions in [2] to [4] are generally around 10 % lower than [1].
To Next Page
Loading...
