39 / 89 83000102.Ki
4.9.2. Oil POE 160SZ
First aid measures:
▪ After inhaling: remove victim to fresh air, ensuring your own safety, and keep the person
at rest in a comfortable position. Get medical attention.
▪ Following skin contact: remove soiled, soaked clothing. Wash skin with water. If
symptoms develop, get medical advice.
▪ Following eye contact: rinse the eyes with clean water or eyewash solution for at least 10
minutes with the eyelids open. Consult an eye specialist.
▪ After swallowing: can cause vomiting. Have the mouth rinsed out with water and give the
patient two glasses of water to drink. Get medical advice.
▪ Notes for the doctor: symptomatic treatment and assistive therapy as indicated.
Fire-fighting measures:
Low fire risk. Product only ignites in case of very large heat supply.
▪ Suitable extinguishing agents: match to the surroundings. Carbon dioxide, powder and
foam extinguishing agents. Use water with caution to avoid possibly considerable steam
generation.
▪ Particular hazards due to the substance, its combustion products or gases formed:
irritant fumes are released during thermal decomposition.
▪ Special protective equipment for fire-fighting: self-contained or air-line breathing
apparatus and acid-resistant protective suit for deployment in immediate vicinity.
▪ Further information: The effect of fire can cause bursting or explosion of the container.
Ignitable gas-air mixtures possible under certain conditions.
Measures in case of accidental release:
▪ Environmental protection measures: do not allow the product to get into the sewers or
bodies of water. Absorb with sand, soil or a similar absorbent material. Ensure proper
disposal in containers.
▪ Cleaning procedure: Clean the contaminated area with water. Caution! Slipping hazard!
▪ Further information: Inform the police or competent authorities in case of penetration in
the sewers or bodies of water.
To Next Page
Loading...
