48 / 89 83000102.Ki
6.2.9. Stability
The normal situation is for the machine and the baseplate to be stood firmly on the ground. It is
not necessary to anchor the machine to the ground. However, if this is necessary due to the
surrounding conditions, the machine can be equipped with the optionally available levelling feet
(3.20 Levelling feet . The levelling feet provide very good resistance to slipping. If this is not
sufficient for your application the machine can also be bolted to the ground. Holes are provided in
the machine baseplate for precisely this purpose. These are shown in Appendix III. The system
designer is responsible for choosing suitable fixing elements.
6.2.10. Levelling
If it is necessary to level the chiller on the ground or floor, this can be done using the optionally
available levelling feet.
6.2.11. Vibration isolation
If it is necessary to isolate the chiller on the ground or floor, this can be done using the optionally
available levelling feet. The levelling feet are fitted with vibration-isolating elastomers.
To Next Page
Loading...
