KMT Streamline SL-V Plus series User Manual

Section 1
Introduction
20412914
8-2012/Rev 09
1-9
Contact the KMT Waterjet Customer Service Department for additional information.
USA
Customer Service Department
Europe
Technical Manager
KMT Waterjet Systems
PO Box 231
635 West 12th Street
Baxter Springs, KS 66713
USA
Phone: (800) 826-9274
Fax: (620) 856-2242
Email: wj.service@kmtwaterjet.com
Email: wj.parts@kmtwaterjet.com
KMT Waterjet Systems GmbH
Wasserstrahl-Schneidetechnik
Auf der Laukert 11
D-61231 Bad Nauheim
Germany
Phone: +49-6032-997-117
Fax: +49-6032-997-270
Email: order.service@kmt-waterjet.com
1.6 Spare Parts
KMT Waterjet maintains a well-stocked Spare Parts Department, staffed by trained,
knowledgeable personnel. If required, emergency shipment is available. Contact the Customer
Service Department to order spare parts, or for additional information.
1.7 Manual Organization
This manual contains operating and maintenance procedures for the complete SL-V series.
Information is organized as follows:
 Section 1, Introduction, provides equipment features and options, a brief operational
overview, details regarding safety issues and contact information for product support.
 Section 2, Installation, details installation requirements and procedures. Systematic
guidelines for commissioning the intensifier are also provided.
 Section 3, Maintenance, highlights routine and preventive maintenance requirements.
Precautions associated with high pressure cutting equipment are also reviewed.
 Section 4, Operation, explains the control functions and the display panel where operating
parameters are set and monitored.
 Sections 5 through 9 are specific to each individual system. Each section contains a
detailed description of the principles of operation and the function of each system.
Routine maintenance procedures associated with the system are also included.
 Section 10, Troubleshooting, is a comprehensive guide containing the information
required to diagnose problems and repair the machine.
 Section 11, Specifications, contains a comprehensive list of equipment specifications; a
detailed discussion of water quality standards and treatment guidelines; as well as
horsepower requirements for various orifice sizes.
 Section 12, Parts List, contains part numbers, descriptions and drawings to facilitate the
ordering of replacement parts.

KMT Streamline SL-V Plus series Specifications

General

Brand	KMT
Model	Streamline SL-V Plus series
Category	Cutter
Language	English