Knapen Trailers K200 - Loading of bulk goods

34
5 Use moving oor trailer
5.2 Loading of bulk goods
5.2.1 Before loading
Check the following points before loading:
Areallwheelsofthetrailerincontactwiththeground?
1
2
Hasthemovablebulkhead(1)beenfullymovedtothefront?
Isthesheet(2)ofthemovablebulkheadpositionedcorrectlyonthemovingoor?
Arethebarsinthedesiredposition?
Isthesheetingsystemopen?
Arethedoorsclosedcorrectlyandisthepneumaticlockingdeviceswitchedon?
Doesthetrailerhavethedesiredheight?Thiscanbeadjustedusingtheheight
control if the EBS cable is connected and the truck is in contact (see Ch 4.7).
5.2.2 During loading
Observe the following points during loading:
Ensure that the bars are not damaged during loading.
Makesurethatnoheavypartsfallonthemovingoorfromgreatheight.
Make sure that the roof sheet is not damaged.
Make sure the trailer is not overloaded.
5.2.3 After loading
Pay attention to the following points after loading:
The air suspension must be put in the "driving position".
The sheeting system must be closed.