Knapen Trailers K200 - Cleaning the Lighting System; Cleaning the Outside

57
User Manual EN | v201906
6.2 Cleaning the lighting system
In the Knapen Trailers tips for moving oor trailers no 13 "Prevent malfunctions of your
lighting system" you can nd how to maintain and clean your lighting system.
www.knapen-trailers.eu/downloads/tips-for-drivers
Check the protection cover regularly for polution. The
protection cover of the lighting system ensures that the
connectors of your lighting system remain clean and dry,
so that the lights function properly. Failure to clean the
protective cover in time can lead to corrosion on the light
connectors, resulting in rotten cables, malfunctioning and
short-circuits.
Each light cover contains a sealing rubber to protect against
moisture and polution. A proper seal is crucial for the life of
your lighting system.
Incorrectreplacementofalightcoveraftercleaningor
replacing a broken light can lead to corrosion and a short
circuit.
6.3 Cleaning the outside
In the Knapen Trailers tips for moving oor trailers no 15 "Correct cleaning keeps the
paintwork in top condition", you can nd how to best clean the outside.
www.knapen-trailers.eu/downloads/tips-for-drivers
Regular and correct cleaning of the outside of your trailer is
very important. This not only keeps the paintwork in good
condition, but also increases the service life. The washing
instructions are on the safety sticker on the head board of
your trailer.
Use a maximum of 60 bar water pressure (870 Psi) and a
temperature of up to max. 60 ° C.
Use neutral cleaning agents (pH7) to prevent aggressive
damage to or corroding of the paintwork.
pH7