SERVICE MANUAL Diagnostics
23JUL01
SM5766-1
Page
85 of 96
Projector does not complete a cycle;
FAN operates.
1. Check for a broken MECHANISM
DRIVE BELT.
2. Check the CYCLE LEVER and
RATCHET LEVER on the CAM
SHAFT ASSEMBLY for the
following:
• correct alignment of the
CYCLE LEVER
• damage to parts
• lubrication of the CYCLE
LEVER (use SUPER LUBE
TL-4276)
3. Check the CYCLE SOLENOID for
correct operation. See the Voltage
chart.
Malfunction Solution
To Next Page
Loading...
