SERVICE MANUAL Diagnostics
23JUL01
SM5766-1
Page
87 of 96
SLIDE TRAY does not advance
smoothly.
1. Check the SLIDE TRAY LATCH
for correct alignment.
2. Operate the projector in the
forward direction.
• Check that the INDEXER
LEVER ASSEMBLY is in the
correct alignment with the
holes at positions A and B.
• Do the adjustment for the
INDEXER LEVER ASSEMBLY.
• Check the condition of the
LOCATOR LEVER, it should
not be bent.
• Check the height of the SLIDE
LIFT LEVER; the lower corner
of the LIFT LEVER LAMP is
parallel with the TOP
HOUSING. If the height is not
correct, do the adjustment for
the MANUAL and POWER
SLIDE LIFT LEVER
ECCENTRICS.
SLIDE TRAY advances when
“REVERSE” is pressed.
1. Do the adjustment for the CYCLE
SOLENOID.
2. Check for a bind in the
DIRECTION LEVER ASSEMBLY.
3. Check that the DIRECTION
LEVER LINK is in the correct
position.
Malfunction Solution
To Next Page
Loading...
