Konica Minolta CA-410 - Calibration; About Calibration Channels

82
Calibration
1. About Calibration Channels
A CA-410 Series probe has calibration channels from CH00 to CH99 (100 channels in total).
CH00 is a channel for measurement in accordance with Konica Minolta’s calibration standard. The channel is preset with
coecients for Konica Minolta calibration, which cannot be changed by the user.
The following can be set for each channel between CH01 to CH99.
Correction coecient for user calibration
In one calibration channel, the correction coecients for user calibration are used in common for each measurement mode
(L
v
x y, L
v
u’v’, Lv Tcpp duv, X Y Z, and Dominant wavelength).