Konica Minolta CA-410 - Page 97

95
6
-1 When selecting [All CH] and pressing the
[ENTER] key, a delete confirmation
message is displayed. Press the [RIGHT]
or [LEFT] key to select [Yes] or [No], and
then press the [ENTER] key to confirm
the action.
User Calib > Delete
MENU
All CH
Select CH
Delete User Calibration CH
Delete all user calibration CH?
NoYes
6
-2 When selecting [Select CH], the screen
for selecting a calibration channel is
displayed. Press the [UP] or [DOWN] key
to select the channel with data to delete.
User Calib > Delete
MENU
All CH
Select CH
UserCalib>Delete>SelectCH
CH00
CH01
CH02
CH03
CH04
CH05
CH06
CH07
CH08
CH09
01
MENU
7
When you press the [ENTER] key, a
delete confirmation message is
displayed. Press the [RIGHT] or [LEFT]
key to select [Yes] or [No] and press the
[ENTER] key to confirm the action.
UserCalib>Delete>SelectCH
CH00
CH01
CH02
CH03
CH04
CH05
CH06
CH07
CH08
CH09
01
MENU
IDDelete User Calibration CH
Delete selected CH?
NoYes
8
Press the [ESC] key twice.
The measurement screen is displayed on the LCD
screen.
CA-DP40
Calibration/
Settings