Konica Minolta CL-70F - Page 88

75
5. Measuring Light Sources [Measurement Screen]
4.
Touch the [Close] button.
Returns to the Measurement screen.
The selected status will be displayed on the status bar.
The preset is set.
5.
The preset is set.Touch the [Delta] icon ( ).
The [Delta] icon will change ( ).
6.
Hold the Measuring Button 5.
While the [Delta] icon is activated ( ), the difference with the preset
reference value is displayed as long as the Measuring Button
5
is pressed.
[Delta] Icon
The selected preset no. is displayed
.