Konica Minolta CS-3000HDR - Page 35

33
Setting
4-a-4. Repeat the procedures 4-a-2. and -3.
for the required number of digits.
4-a-5. Press
ENTER
key.
When the setting is confirmed, the MENU - MEAS
- SYNC MODE screen appears again on the LCD.
4-a-6. Press
ESC
key.
When the synchronization method is set, the
MENU-MEAS screen appears again on the LCD.
The setting of the synchronization method is
saved even after the power switch is turned off (O).
For the NO-SYNC or EXT-SYNC setting
4-b-1. Select either [NO SYNC] or [EXT SYNC]
and press
ENTER
key.
5. Press
ESC
key.
The MENU screen appears again on the LCD.
6. Press
ESC
key.
The MEAS screen appears again on the LCD.
MEAS SNGL
UC00
SPD
Nrm
CMF
2 ˚
SYN
[
Hz
]
50.00
ACC
Non
cd
m
2
Lv 49. 66
0 . 4045
0 . 4088
x
y
1 ˚