56
Setting
Backlight ON/OFF During Measurement
The LCD backlight can be selectively turned on or off during measurement. Turning off the backlight can
avoid LCD backlight reflection on the surrounding area during measurement, which affects the
measurement value.
When pressing the BACKLIGHT key to turn off the backlight, it is turned off irrespective of the following
setting.
* Factory default setting: ON
Operating Procedure
1
6, 7
1. Press
MENU
key when the MEAS screen
is displayed.
The MENU screen appears on the LCD.
When the backlight of the LCD has been turned off via
BACKLIGHT
key on the MEAS screen, the
backlight is turned on.
SPD
CMF
SYN
[
Hz
]
ACC
cd
m
2
Lv
63.60
0 . 4015
0 . 4061
x
y
MEAS
MEMORY
OPTION
SETUP
DARK MEASUREMENT
INFORMATION
2. Press either or key to select
[SETUP] and then press
ENTER
key.
The MENU - SETUP screen appears on the LCD.
The current set contents are displayed in the
[BACKLIGHT@MEAS] item.
CMF 2˚
RS-POWER SUPPLY
OFF
BACKLIGHT@MEAS
ON
SETUP
(
1/3
)
2, 3, 4, 5
To Next Page
Loading...
Need help?
General
