6
Safety Symbols ...................................... ii
Introduction .......................................... 3
Notes on Use ............................................ 3
Operating Environment ............................................3
This Instrument .........................................................4
Objective Lens, ND Filter, Closeup Lens, and
Illuminance Adapter (Optional Accessories) ..............4
Notes on Storage ...................................... 5
Main Unit ..................................................................5
Objective lens ...........................................................5
Cleaning ................................................... 5
Main Unit ..................................................................5
Objective lens ...........................................................5
Notes on Transporting .............................. 5
Maintenance ............................................ 5
Disposal Method ...................................... 5
Standard Accessories ............................. 8
Optional Accessories .............................. 9
System Configuration .......................... 11
Names and Functions of Parts ............... 12
Names of Each Part ................................. 12
Functions of Each Part............................. 13
Key Panel ............................................... 14
Main Functions of Each Key ..................... 14
Diopter Adjustment ................................ 15
LCD Screen ............................................. 16
MEAS (Measurement Value) Screen ........................16
MENU Screen .........................................................17
Installation
Installing ............................................. 20
Connecting AC Adapter ........................ 21
Connection Method ................................ 22
Power supply ON ( | ) / OFF (O) ............. 23
Turning Power Switch ON .......................................23
Turning Power Switch OFF ......................................23
Setting
Selecting Measurement Speed ............. 26
Setting of Synchronization ................... 31
Emission Frequency Detection and Setting
Function (CS-3000HDR/CS-3000 only) .......... 34
Vertically Synchronized Signal Input
Method .................................................. 36
Selecting Synchronous Frames ............. 38
Selecting Measurement Angle .............. 40
Selecting Color Matching Functions ...... 42
Selecting Display Format ...................... 44
Process Settings for Negative Spectral
Radiance Values ..................................... 46
Selecting Color Space ........................... 48
Using the Closeup Lens ........................ 50
Using the ND Filter ............................... 52
Using the Illuminance Adapter ............. 54
Backlight ON/OFF During
Measurement ...................................... 56
Baud Rate Selection for RS-232C
Communication ................................... 58
Setting RS-232C Power Supply ............. 60
Setting Internal Clock ........................... 62
Setting Periodic Calibration Reminders ... 64
Contents
To Next Page
Loading...
Need help?
General
