Konica Minolta CS-3000HDR - Deleting Memory Data

77
Measurement
Deleting Memory Data
Follow the procedure below to delete the saved measurement values.
Operating Procedure
1.
Press
MENU
key when the MEAS screen
is displayed.
The MENU screen appears on the LCD.
When the backlight of the LCD has been
turned off via
BACKLIGHT
key on the
MEAS screen, the backlight is turned on.
MEAS SNGL
UC00
SPD
Nrm
CMF
2 ˚
SYN
[
Hz
]
59.94
ACC
Non
cd
m
2
Lv 57.12
0 . 4045
0 . 4085
x
y
1 ˚
MEAS
MEMORY
OPTION
SETUP
DARK MEASUREMENT
INFORMATION
MENU
2
. Press either or key to select
[MEMORY]
and then press
ENTER
key.
The MENU - MEMORY screen appears on the LCD.
MENU
MEMORY
DELETE
PROPERTIES
3
. Press either or key to select
[DELETE] and then press
ENTER
key.
The MENU - MEMORY - DELETE (for deleting
memory data) screen appears on the LCD.
The memory data number 00 is displayed.
MEM.DATA NO.00
Lv 7.2845E+0
x 0.1700
y 0.0938
MENU
MEMORY
MEM.DELETE
1
5, 6, 7, 8
2, 3, 4, 5