Konica Minolta CS-3000HDR - Setting Internal Clock

62
Setting
Setting Internal Clock
This instrument has an internal clock that records the date and time of measurements. Check the date
and time, and if there is a discrepancy, enter the correct date and time. The date display format can also
be changed.
* Factory default setting : Time adjusted at time of shipment, Display format: YYYY/MM/DD
Operating Procedure
1
4, 5
1. Press
MENU
key when the MEAS screen
is displayed.
The MENU screen appears on the LCD.
When the backlight of the LCD has been turned off via
BACKLIGHT
key on the MEAS screen, the
backlight is turned on.
MEAS SNGL
UC00
SPD
Nrm
CMF
2 ˚
SYN
[
Hz
]
59.94
ACC
Non
cd
m
2
Lv 55.40
0 . 4087
0 . 4188
x
y
1 ˚
2. Press either or key to select
[SETUP] and then press
ENTER
key.
The MENU - SETUP screen appears on the LCD.
DATA FORM F
EXT VOLTAGE
3.3V
DATE TIME
2022/10/19
17:02:01
RS-232C BAUDRATE
115200bps
MENU
SETUP
(
2/3
)
2, 3
Setting the date and time
3-a-1. Press either or key to select
[DATE TIME] and then press
ENTER
key.
The MENU - SETUP - DATE TIME screen appears
on the LCD.
The date and time setting screen appears.
YYYY / MM / DD
2022 / 10 / 19
17 : 02 : 35
MENU
SETUP
(
2/3
)
DATE TIME
MEAS
MEMORY
OPTION
SETUP
DARK MEASUREMENT
INFORMATION
MENU