Konica Minolta CS-3000HDR - Page 39

37
Setting
3. Press either or key to select [EXT
VOLTAGE] and then press
ENTER
key.
The MENU - SETUP - EXT VOLTAGE screen appears
on the LCD.
EXT VOLTAGE
MENU
SETUP
(
2/3
)
3.3 V
5. Press
ESC
key.
The MENU - SETUP screen appears again on the LCD.
DATA FORM F
EXT VOLTAGE
1.8V
DATE TIME
2022/10/31
11:10:12
RS-232C BAUDRATE
115200bps
MENU
SETUP
(
2/3
)
6. Press
ESC
key.
The MENU screen appears again on the LCD.
7. Press
ESC
key.
The MEAS screen appears again on the LCD.
4. Input the voltage value of the input signal
in [EXT VOLTAGE].
Press either or key to move the
cursor.
Press either or key to set voltage
and then press
ENTER
key.
The MENU - SETUP - EXT VOLTAGE screen appears on
the LCD.
The current set contents are displayed in the [EXT
VOLTAGE] item.
EXT VOLTAGE
MENU
SETUP
(
2/3
)
1.8 V
8. The measurement object’s vertically
synchronized signal output terminal and
the main unit’s vertically synchronized
signal input terminal are connected by a
BNC cable.