Korg opsix - Detailed editing with the motion sequencer

33
Detailed editing with the motion sequencer
Use the steps below to edit each step of the motion sequences.
1.
Hold down the SHIFT button and press the PITCH/SEQ button.
2.
Press the PAGE < and > buttons to display the MOTION page.
3.
Use the DATA ENTRY A knob to select the lane you wish to edit.
e selected lane is shown in highlighted text on the le side of the display.
4.
Press one of the STEP 1–16 buttons to select the step to edit.
e STEP button that you selected will blink.
5.
Use the DATA ENTRY B–E knobs to change the parameters.