Kramer VS-42UHD User Manual

VS-42UHD - Protocol 3000 49
13.3.1.10 VERSION
Functions Permission Transparency
Set:
-
- -
Get:
VERSION?
End User
Public
Description Syntax
Set: - -
Get:
Get firmware version number
#VERSION?CR
Response
~nn@VERSIONSP
firmware_version
CR LF
Parameters
firmware_version –
XX.XX.XXXX
where the digit groups are: major.minor.build version
Response Triggers
Notes
K-Config Example
“#VERSION?”,0x0D
13.3.1.11 DISPLAY
Functions Permission Transparency
Set:
-
-
-
Get
DISPLAY?
End User Public
Description Syntax
Set:
-
-
Get: Get output HPD status
#DISPLAY?SP
out_id
CR
Response
~nn@DISPLAYSPout_id,statusCR LF
Parameters
out_id – 1 (HDMI Out)
status – HPD status according to signal validation : 0 (Off), 1 (On), 2 (On and all parameters are stable
and valid)
Response Triggers
A response is sent to the com port from which the Get was received, after command execution and:
After every change in output HPD status from On to Off (0)
After every change in output HPD status from Off to On (1)
After every change in output HPD status
form Off to On and all parameters (new EDID, etc.) are stable and
valid (2)
Notes
K-Config Example
Get the output HPD status of HDMI Out:
“#DISPLAY? 1”,0x0D

Kramer VS-42UHD Specifications

General

Brand	Kramer
Model	VS-42UHD
Category	Matrix Switcher
Language	English