Kramer VS-88H2

Kramer Electronics Ltd.
VS-88H2 – Using Embedded Web Pages
33
Setting Switching Speed
This section contains information on setting switching speed using webpages. For information
on setting switching speed using front panel buttons, see Setting Switching Speed
on page 23.
To set switching speed:
1. In the Navigation pane, click Switching.
The Switching page appears (Figure 18).
2. Select the AFV tab.
The Audio-follow-video tab is displayed (Figure 18).
3. Click on an output button (Figure 19).
The output settings window appears (Figure 20).
4. Select Switch Speed dropdown box and set switching speed to normal ( ), fast ( )
or extra-fast ( ).
Muting/Unmuting Video
This section contains information on muting/unmuting video using webpages. For information
on muting/unmuting video using front panel buttons, see Muting/Unmuting an Output Video
Signal on page 18.
indicates video is not muted.
indicates video is muted.
To mute video:
1. In the Navigation pane, click Switching.
The Switching page appears (Figure 18).
2. Select the AFV tab.
The Audio-follow-video tab is displayed (Figure 18).
3. Click Video Mute ( ) icon.
The Video Mute icon displays an x and the output selected displays a black screen.
To unmute video:
1. In the Navigation pane, click Switching.
The Switching page appears (Figure 18).
2. Select the AFV tab.
The Audio-follow-video tab is displayed (Figure 18).
3. Click Video Unmute ( ) icon.
The Video Unmute icon’s red x disappears, and the output selected displays the
signal.