Krone X-Disc 620 - Behaviour in Hazardous Situations and When Accidents Occur

Safety
22
Pos: 17.8.66 /BA/Si cherheit/1. Grundlegend e Sicherheitshin weise/Gefahren bei bes t. Tätigkeiten: Gefahr durch Schweißarbeite n - Außer Selbstfahrer @ 244\mod_139575651201 3_78.docx @ 1907210 @ @ 1
Danger associated with welding work
Improper welding work will endanger the operational safety of the machine. As a result,
accidents may occur and people may be seriously injured or killed.
• Before performing welding work on the machine, obtain the consent of KRONE customer
service and, if required, identify alternatives.
• Have welding work performed by experienced technicians only.
Pos: 17.8.67 /Überschr iften/Überschr iften 3/U-Z/Verhalt en in Gefahrensitua tionen und bei Unfällen @ 187\ mod_1380023393504_78. docx @ 1607682 @ 3 @ 1
3.4.18 Behaviour in hazardous situations and when accidents occur
Pos: 17.8.68 /BA/Si cherheit/1. Grundlegend e Sicherheitshin weise/Verhalten i n Gefahrensituationen und bei Unfällen @ 177\mod_1373 291508723_78.doc x @ 1510758 @ @ 1
Neglected or incorrect procedures in hazardous situations may obstruct or prevent the rescue of
people in danger. Difficult rescue conditions will impair the chances of helping and healing the
injured.
• In principle: Switch off the machine.
• Gain an overview of the hazardous situation and identify the cause of the hazard.
• Safeguard the accident location.
• Rescue people from the danger zone.
• Withdraw from the danger zone and do not enter again.
• Alert rescue teams and, if possible, fetch help.
• Take immediate life-saving measures.
Pos: 17.9 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_119617531122 6_0.docx @ 4165 @ @ 1