Krone X-Disc 620 - 9 Settings

Settings
49
Pos: 55.1 /Überschri ften/Überschri ften 1/A-E/Einstellu ngen @ 0\mod_11998687838 62_78.docx @ 36141 @ 1 @ 1
9 Settings
Pos: 55.2 /BA/Sic herheit/7. Gefahrenhin weise alt/Vorsätze/ Gefahr Wartung allge mein Vorsätze/Feldhäc ksler (Messertel ler) @ 13\mod_12254535558 95_78.docx @ 156385 @ @ 1
Danger! - When performing repair, maintenance or cleaning work or when making
technical modifications to the machine, drive elements may start moving (caution:
cutting discs continue to run).
Effect: Danger to life, injuries or damage to the machine.
• Move the machine to the working position and lower it to the ground
• Switch off the forage harvester engine and remove the ignition key.
• Secure the forage harvester against accidental start-up and against rolling away.
• Switch off the PTO and disengage it.
• After the repair, maintenance, cleaning work or technical modifications are completed,
mount all protective covers and protective devices properly again.
• Avoid skin contact with oils, greases, cleaning agents and solvents.
• In the event of injuries or burns due to oils, cleaning agents or solvents, contact a doctor
immediately.
• All other safety instructions must also be followed to avoid injuries and accidents.
Pos: 55.3 /BA/Sic herheit/Vorsätze/ Gefahr - Reparatur-,W artungs- und Reinigungsarbei ten Erweiterung Mess erteller @ 12\mod_1224 846225151_78.doc x @ 153983 @ @ 1
Danger! - When performing repair, maintenance or cleaning work or when making
technical modifications to the machine, drive elements may start moving (caution:
cutting discs continue to run).
Effect: Danger to life or serious injuries
• Switch off the drive and disengage PTO.
• Switch off the forage harvester engine and remove the ignition key.
• Secure the forage harvester against accidental start-up and against rolling away.
• When working under or with the raised machine, always secure it with suitable supporting
elements.
• Close shut-off valve on lifting cylinder of forage harvester!
• After all repair, maintenance and cleaning tasks are complete, all protective covers and
protective devices must be put in place again.
Pos: 55.4 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_119617531122 6_0.docx @ 4165 @ @ 1