Krone X-Disc 620 - 15 Index

84
15 Index
A
Abrasion Limit ..................................................... 67
Adapter Frame .................................................... 40
Additional equipment and spare parts ................ 12
Adjusting machine to the forage harvester BiG X
480/580 ........................................................... 33
Adjusting the locking plates ................................ 34
Adjusting the main angular gearbox ................... 36
Affixing the Adhesive Safety and Information
Labels ............................................................. 27
After Shearing Off ............................................... 74
Aligning the Cutter Bar ........................................ 60
B
Basic safety instructions ..................................... 10
Before the Start of the New Season ................... 81
Behaviour in hazardous situations and when
accidents occur ............................................... 22
Blade Changing on Cutting Discs ....................... 68
Blade Quick-Fit Device ................................. 64, 70
Blade screw connection ...................................... 63
Blade Screw Connection .................................... 69
C
Checking the Cutter Blades and Blade Holder ... 62
Children in danger .............................................. 11
Commissioning ................................................... 31
Connecting front attachments or trailers ............. 11
Consumables ...................................................... 19
Contact ............................................................... 27
Cutter Blades ...................................................... 62
D
Danger zones ..................................................... 14
Dangers associated with certain activities
Work on the machine ...................................... 21
Detaching the machine ....................................... 47
Direction Information ............................................. 8
Disposal of the machine .................................. 83
Driving and Transport ......................................... 43
F
Filling Quantities and Lubrication Designations for
Gearboxes ...................................................... 30
From transport into working position .................. 45
I
Identification Plate .............................................. 26
Importance of the operating instructions ............ 10
Indications in the Document ................................. 8
Infeed Sheets ..................................................... 76
Information Required for Questions and Orders 26
Intended Use ........................................................ 9
K
Keeping safety devices functional ..................... 16
L
Lubricants .......................................................... 30
Lubrication Chart ................................................ 79
M
Machine overview .............................................. 24
Maintenance ...................................................... 53
Maintenance – lubrication chart ......................... 78
Maintenance table .............................................. 54
Metric Thread Screws with Control Thread ....... 55
Metric Thread Screws with Countersunk Head
and Hexagonal Socket ................................... 56
Metric Thread Screws with Fine Thread ............ 56
O
Oil level check and oil change on the cutter bar 60
Operation ........................................................... 45
Operational safety: Technically perfect condition
....................................................................... 13
P
Park
ing the machine safely ................................ 18
Periodical Inspection of the Cutting Discs / Blade
Drums ............................................................ 66
Periodical Inspection of the Leaf Springs .......... 65
Personal protective equipment .......................... 17
Personnel qualification ....................................... 10
Placing in Storage .............................................. 80
Position of the Adhesive Safety Stickers on the
Machine ......................................................... 28
PTO shaft ........................................................... 78
Purpose of Use .................................................... 9
R
Re-Ordering the Adhesive Safety and Information
Labels ............................................................ 27
Replacing the linings .......................................... 71
Rotary hub with shear fuse (optional) ................ 72
Rubber Strip ....................................................... 77
S
Safety ................................................................... 9
Safety routines ................................................... 23
Safety signs on the machine .............................. 17
Service life of the machine ............................... 9