Safety
16
Pos: 17.8.33 /BA/Si cherheit/1. Grundlegend e Sicherheitshin weise/Gefahrenberei ch Gelenkwelle @ 176\mod_1 372945619081_78.d ocx @ 1508114 @ @ 1
Danger zone universal shaft
People may become caught by the universal shaft, pulled in and seriously injured.
• Ensure that the universal shaft guards are attached and functional.
• Ensure that nobody is in the danger zone of the PTO shaft or the universal shaft.
• Provide the section tube and universal shaft guards with adequate cover.
• Allow the universal shaft locks to engage.
• Attach the chains to prevent the universal shaft guards from rotating with the shaft.
• Follow the operating instructions for the universal shaft.
Pos: 17.8.34 /BA/Si cherheit/1. Grundlegend e Sicherheitshin weise/Gefahrenberei ch Nachlaufende Masc hinenteile - X-Di sc @ 329\mod_1426852529450_78. docx @ 2519758 @ @ 1
Danger zone due to machine parts continuing to run
After the drives have been switched off, the following machine parts will continue to run:
– Mower drums
Persons may be seriously injured or killed when machine parts continue to run.
• Only touch machine parts when they are at standstill.
Pos: 17.8.35 /Überschr iften/Überschr iften 3/P-T/SSchutz vorrichtungen funk tionsfähig halten @ 187\ mod_1380021062004_78. docx @ 1607105 @ 3 @ 1
3.4.10 Keeping safety devices functional
Pos: 17.8.36 /BA/Si cherheit/1. Grundlegend e Sicherheitshin weise/Schutzvorr ichtungen funktionsfä hig halten @ 176\mod_13730 04721530_78.doc x @ 1508355 @ @ 1
If safety devices are missing or damaged, people may be seriously injured or killed by moving
machine parts.
• Replace damaged safety devices.
• Re-install all removed safety devices and all other parts and move them into protective
position before starting up the machine.
• If it is doubtful whether all safety devices have been correctly installed and are functional,
have a service centre check them.
Pos: 17.8.37 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.d ocx @ 4165 @ @ 1
To Next Page
Loading...
