Krone X-Disc 620 - Maintenance Table

Maintenance
54
Pos: 59.11 /Übersc hriften/Überschri ften 2/U-Z/Wartungstabe lle @ 65\mod_13003694 13064_78.docx @ 583966 @ 2 @ 1
10.3 Maintenance table
Pos: 59.12 /BA/W artung/Vorsätze/X-Disc 6200/Wartungstabe lle - X-Disc 6200 @ 338\mod_143 0745658508_78.doc x @ 2564864 @ @ 1
Maintenance work
Maintenance interval
Once after 10 hours Before the beginning of the season Every 10 hours but at least 1x daily Once after 50 hours Every 50 hours Every 200 hours
Main angular gearbox
Oil level check
X X
Oil change
X X X
L-corner gearbox
Oil level check
X X
Oil change
X X X
Cutterbar drive gear
Oil level check
X X
Oil change
X X X
Cutterbar
Oil level check
X X
Oil change (not required)
Cutter blades
Check
X X
Cutting discs / mower drums
Check
X X
Rotary hub
Check
X X
Drive chains
Check the pretension
X X
Tightening screws / nuts
All screws
X X
Wear sheets for trough
Check for wear
X X
Scraper bars
Check distance between scraper bars and conveyor
auger
X X
Infeed sheets
Check for wear
X
Safety devices
Check guard cloth for damage and wear
X X
Check rubber strips for damage and wear
X X
Pos: 59.13 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1