Chapter - 2 General Safety Instructions
8
Careful!
Damage to electrical components by condensate
formation.
Wait at least one hour after transporting the
instrument in a cooler environment (e.g. cold room
or outdoors) before connecting to the power
supply.
Careful!
Overheating damage.
Do not place the instrument near a heat source
(e.g. heating).
Do not expose to direct sunlight.
Allow for unhindered air circulation.
Attention!
Aggressive chemicals may damage the instrument's
paint or the plastic housing!
Clean the instrument with neutral cleaning agents
only.
DO NOT use aggressive chemicals for cleaning,
such as strong or weak acids or bases, acetone,
formaldehyde, chlorinated hydrocarbons or
phenols.
If the instrument comes into contact with aggressive
chemicals, clean immediately with a neutral
cleaning agent.
To Next Page
Loading...
Need help?
General
