kruss P3000 - 6.3 Measurement Results; Measurement Result Display; Printing the Displayed Measurement Result; Switching off the Instrument

Chapter - 6 Routine Operation / 6.3 Measurement Results
32
After cleaning, the sample tube is again available for
the next sample measurement.
The motor of the polarimeter is automatically switched
off after a few seconds.
6.3 Measurement Results
Measurement Result
Display
The measurement result is displayed together with the
unit.
Printing the Displayed
Measurement Result
 Press .
The measurement result shown on the display is printed
out on the connected printer.
Switching off the
Instrument
 Switch off the printer.
 Switch off the polarimeter (switch located on the
back of the instrument).