KTM 1190 RC8 User Manual

TECHNICAL DATA - ENGINE 211
Design 2-cylinder 4-stroke Otto motor, 75° V arrangement, water-cooled
Displacement 1,150 cm³ (70.18 cu in)
Stroke 69 mm (2.72 in)
Bore 103 mm (4.06 in)
Compression ratio 12,5:1
Control DOHC, 4 valves per cylinder, chain-driven
Valve - valve stem diameter
Intake 42 mm (1.65 in)
Exhaust 34 mm (1.34 in)
Valve clearance
Exhaust at: 20 °C (68 °F) 0.25… 0.30 mm (0.0098… 0.0118 in)
Intake at: 20 °C (68 °F) 0.10… 0.15 mm (0.0039… 0.0059 in)
Crankshaft bearing Sleeve bearing
Conrod bearing Sleeve bearing
Piston pin bearing No bearing bushes - DLC-coated piston pins
Piston Forged light alloy
Piston ring 1 L-ring, 1 tapered compression piston ring, 1 oil scraper ring
Engine lubrication Pressure circulation lubrication with 3 rotor pumps
Primary transmission 40:76
Clutch Multi-disc clutch in oilbath / hydraulically operated
Transmission 6-speed claw gears
Transmission ratio
1st gear 14:36
2nd gear 16:30
3rd gear 20:30

KTM 1190 RC8 Specifications

General

Engine Type	V-Twin, 4-stroke
Displacement	1195 cc
Transmission	6-speed
Cooling	Liquid cooled
Fuel Tank Capacity	16.5 liters
Rear Brakes	Single 220 mm disc, Brembo 2-piston caliper
Seat Height	805 mm
Front Suspension	WP USD Ø 43 mm
Rear Suspension	WP monoshock
Front Brakes	2 x 320 mm discs, radially mounted Brembo 4-piston calipers
Frame	Chromium-Molybdenum tubular space frame, powder-coated