KTM 1190 RC8 - Braking

RIDING INSTRUCTIONS 88
– If the EFI warning lamp (MIL) starts to light up during the journey, stop immediately. If
you shift to neutral, the EFI warning lamp (MIL) begins to flash.
Info
From the flash rhythm, you can deduce a two-digit number, the so-called flash
code. The flash code tells you which component is affected by a fault.
7.5Braking
Warning
Danger of accidents If you brake too hard, the wheels can lock.
– Adapt your braking to the traffic situation and the road conditions.
Warning
Danger of accidents Reduced braking due to wet or dirty brakes.
– Clean or dry dirty or wet brakes by riding and braking gently.
Warning
Danger of accidents Reduced braking effect caused by spongy pressure point of front or rear brake.
– Have the brake system checked in an authorized KTM-RC8 workshop before continuing your journey.
Warning
Danger of accidents Brake system failure.
– If the foot brake pedal is not released, the brake linings drag permanently. The rear brake can fail due to overheating. Take your
foot off the foot brake pedal if you do not want to brake.
Warning
Danger of accidents Longer stopping distance due to higher overall weight.
– Take the longer stopping distance into account when carrying a passenger and baggage.