KTM 1190 RC8 - Riding Instructions; Checks to be Made before Putting into Operation

RIDING INSTRUCTIONS 82
7.1Checks to be made before putting into operation
Info
During operation, the motorcycle must be in a technically perfect condition.
In the interest of riding safety, you should get into the habit of making a general check of the motorcycle before every journey.
– Check the engine oil level. ( p. 186)
– Check the engine for oil leaks.
– Check the fuel level.
– Bleed fork legs. ( p. 101)
Guideline
Every 1,000 km (621.4 mi)
– Check the chain tension. ( p. 123)
– Clean the chain. ( p. 122)
– Check the tire condition. ( p. 143)
– Check the tire air pressure. ( p. 145)
– Check the brake fluid level of the front brake. ( p. 130)
– Check the rear brake fluid level. ( p. 134)
– Check the front brake linings. ( p. 133)
– Check the rear brake linings. ( p. 136)
– Check the brake system.
– Check the coolant level. ( p. 173)
– Check the adjustment and smooth operation of all operating elements.
– Check the functioning of the electrical equipment.
– Check that any luggage is fastened correctly.
– Sit on the motorcycle and check the setting of the rear mirror.