KTM 1190 RC8 - LAP Menu, LAP BLANK T Button

OPERATING ELEMENTS 48
5.32LAP menu, LAP BLANK T button
400461-01
Condition
• The ignition is on.
• The motorcycle is stationary.
– Press the button and the button for 3 - 5 seconds.
– Press the button twice until the symbol is on SETTINGS in the info display.
– Press the MODE button briefly.
– Press the button once until the symbol is on LAP BLANK T in the info display.
– Press the MODE button briefly.
On the LAP BLANK T menu, you set the lap blank time of the LAP button.
Press the button . increases the value
Press the button . decreases the value
Press the button
and the button for
3 - 5 seconds.
no function
Press the MODE but-
ton for 3 - 5 sec-
onds.
Open and exit LAP BLANK T
Press the MODE but-
ton briefly.
Open and exit LAP BLANK T