MAINTENANCE WORK ON CHASSIS AND ENGINE 96
9.1Jacking up motorcycle front
Note
Danger of damage The parked vehicle can roll away or fall over.
– Always place the vehicle on a firm and even surface.
– Jack up the motorcycle rear end. ( p. 97)
700250-01
– Move the handlebar to the straight-ahead position. Align the work stand at the front
with the adapters to the fork legs.
Work stand front (61029055300)
Info
Always jack up the rear of the motorcycle first.
– Jack up the motorcycle at the front.
9.2Taking front of motorcycle off work stand
Note
Danger of damage The parked vehicle can roll away or fall over.
– Always place the vehicle on a firm and even surface.
– Secure the motorcycle against falling over.
– Remove the work stand from the front.
To Next Page
Loading...
