EasyManua.ls Logo

KTM 1190 RC8 - Changing the Low Beam Bulb

KTM 1190 RC8
240 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAINTENANCE WORK ON CHASSIS AND ENGINE 158
Use spare fuses with the correct rating only.
Fuse (75011088010) ( p. 217)
Fuse (75011088015) ( p. 217)
Info
If the new fuse burns out after it is inserted, it is important that you contact an
authorized KTM-RC8 workshop.
Tip
Replace the spare fuse in the fuse box so that it is available if needed.
Close the fuse box cover.
Fit the seat. ( p. 146)
9.60Changing the low beam bulb
Note
Damage to reflectorKeep the glass of the bulb free of grease.
Clean the glass bulb with a clean cloth before mounting. Any grease on the glass will evaporate by the heat and be deposited on the
reflector.
Switch off all power consumers and switch off the engine.

Table of Contents

Related product manuals