KTM 1190 RC8 - Service Schedule; Important Service Tasks to be Carried out by an Authorized KTM-RC8 Workshop

SERVICE SCHEDULE 92
8.1Important service tasks to be carried out by an authorized KTM-RC8 workshop.
K10N K75A K150A J1A J2A
Engine
Change the engine oil and filter, clean the oil screen. x ( p. 187)
• • • • •
Check the valve clearance. x
•
Replace the spark plugs. x
•
Check the engine fixing screws and other engine screws accessible
from outside to ensure that they are tight. x
• • •
Check the clutch. x
•
Clean the oil jet for clutch lubrication. x
•
Fuel injection Read out the status request and fault memory with the KTM diagnos-
tics tool. x
• • •
Check bellows for tears and leaks, and check the linkage of the throt-
tle valve spigot for freedom of movement. x
•
Check the cable harness of the throttle valve body for damage and cor-
rect routing. x
•
Check hoses of vacuum sensors, SLS hoses and vent hoses for dam-
age, correct routing and leaks. x
• • • • •
Check the fuel hose for damage, correct routing and leaks. x
• • • • •
Check the fuel pressure. x
• •
Attachments
Check the cooling system for leaks. x
• • • • •
Check the water pump for leaks (visual check). x
• • •
Check the coolant level. ( p. 173) • • • • •
Check the antifreeze. x
• • • • •
Check the functioning of the radiator fan. x
• • •