KTM 1190 RC8 - Setting the Temperature Unit SET °C;°F; Switching the External Temperature Display On;Off

OPERATING ELEMENTS 70
5.50Setting the temperature unit SET °C/°F
Condition
The ignition is on.
The motorcycle is stationary.
400465-01
– Press the button and the button for 3 - 5 seconds.
– Press the button three times until the symbol is on UNITS in the info display.
– Press the MODE button briefly.
– Press the button once until the symbol is on SET °C/°F in the info display.
– Press the MODE button briefly.
The selected unit appears on the left of the display.
– Select the unit with the button or the button.
– Press the MODE button briefly.
The settings are stored and the display changes to the UNITS menu.
– Press the button briefly and repeatedly until the symbol is on BACK... in the info
display.
– Press the MODE button briefly.
– Press the button briefly and repeatedly until the symbol is on EXIT SETUP in the
info display.
– Press the MODE button briefly.
5.51Switching the external temperature display on/off
Condition
The ignition is on.
The motorcycle is stationary.