13 WHEELS, TIRES 101
601904-10
– Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Replace the wheel bearing. x
– Remove the bushing 1. Clean and grease the roll surfaces of the bushing and the shaft
seal ring 2.
Long-life grease ( p. 179)
– Clean and grease the thread of the wheel spindle and nut 3.
Long-life grease ( p. 179)
– Install the rubber damper and rear sprocket carrier in the rear wheel.
– Position the rear wheel.
The brake linings are correctly positioned.
To Next Page
Loading...
