14 ELECTRICAL SYSTEM 120
601912-10
– Position groove 4 on counterpiece 5.
601909-11
– Position brake line guide 6. Mount and tighten screws 7.
Guideline
Screw, headlight mask M5 5 Nm (3.7 lbf ft)
Finishing work
– Check the headlight setting. ( p. 124)
14.8 Changing the headlight bulb
Note
Damage to reflector Reduced brightness.
– Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
To Next Page
Loading...
