KTM 690 SMC R EU - 10.3 Adjusting the rebound damping of the fork

10 TUNING THE CHASSIS 61
Guideline
Compression damping
Comfort 25 clicks
Standard 20 clicks
Sport 15 clicks
Full load capacity 15 clicks
Info
Turn clockwise to increase damping; turn counterclockwise to reduce damping.
10.3 Adjusting the rebound damping of the fork
Info
The hydraulic rebound damping determines the fork rebound behavior.
601877-10
– Turn adjusting screws 1 clockwise all the way.
Info
The adjusting screws are located at the top end of the fork legs.
Make the same adjustment on both fork legs.
– Turn back counterclockwise by the number of clicks corresponding to the fork type.