KTM 690 SMC R EU - 11.9 Removing the fork protector

11 SERVICE WORK ON THE CHASSIS 72
– Clean and oil the dust boots and inside fork tube of both fork legs.
Universal oil spray ( p. 180)
– Push the dust boots back into their normal position.
– Remove excess oil.
Finishing work
– Install the fork protector. ( p. 73)
– Remove the motorcycle from the lift stand. ( p. 67)
11.9 Removing the fork protector
S00054-12
– Remove screws 1 and take off clamp.
– Remove screws 2 on left fork leg. Remove the fork protector.
– Remove the screws on the right fork leg. Remove the fork protector.