KTM 690 SMC R EU - 11.10 Installing the fork protector; 11.11 Removing the seat

11 SERVICE WORK ON THE CHASSIS 73
11.10 Installing the fork protector
S00054-13
– Position the fork protection on the left fork leg. Mount and tighten screws 1.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
– Position the brake line and cable harness. Put the clamp on, mount and tighten
screws 2.
– Position the fork protection on the right fork leg. Mount and tighten the screws.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
11.11 Removing the seat
601869-10
– Pull on strap 1 and raise the rear of the seat at the same time.
– Pull back the seat and lift it off.