KTM 690 SMC R EU - 16.2 Adjusting the play in the throttle cable; 16.3 Adjusting the engine characteristic

16 TUNING THE ENGINE 134
C00187-10
Main work
– Move the handlebar to the straight-ahead position.
– Use the KTM diagnostics tool to set the motor drive to the basic position.
– Loosen counter nut 1.
– Set the play in the throttle cable by turning the adjusting screw 2.
Guideline
Throttle cable play 3… 5 mm (0.12… 0.2 in)
– Tighten counter nut 1.
16.3 Adjusting the engine characteristic
Preparatory work
– Switch off the ignition by turning the ignition key to position OFF .
– Remove the seat. ( p. 73)
C00185-12
Main work
– Pull the Map‑Select switch and holder 1 upward off of the retaining bracket.
– Pull the Map‑Select switch out of the holder.