11 SERVICE WORK ON THE CHASSIS 85
601885-10
– Adjust the basic setting of the clutch lever to your hand size by turning adjusting
screw 1.
– When adjusting the clutch lever, make sure to leave a minimum clearance to other parts
of the vehicle.
Guideline
Minimum clearance 5 mm (0.2 in)
11.21 Checking/rectifying the fluid level of the hydraulic clutch
Info
The fluid level rises with increasing wear of the clutch lining disc.
Do not use brake fluid.
– Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
100281-10
– Remove screws 1.
– Remove cover 2 with membrane 3.
– Check the fluid level.
Fluid level under top level of container 4 mm (0.16 in)
» If the level of the coolant does not meet specifications:
– Correct the fluid level of the hydraulic clutch.
Hydraulic fluid (15) ( p. 176)
– Position the cover with the membrane. Mount and tighten the screws.
To Next Page
Loading...
