KTM 690 SMC R EU - 11.12 Mounting the seat; 11.13 Removing the air filter

11 SERVICE WORK ON THE CHASSIS 74
11.12 Mounting the seat
601887-10
– Hook slot 1 of the seat onto screw 2, press the rear downward and at the same time push it forward.
– Push locking pin 3 into lock housing 4 and push the back of the seat down until the locking pin locks in place with an audible click.
– Finally, check that the seat is correctly mounted.
11.13 Removing the air filter x
Preparatory work
– Remove the seat. ( p. 73)
601882-10
Main work
– Remove screws 1. Take off air filter box top 2.