KTM 690 SMC R EU - 14.10 Changing the turn signal bulb

14 ELECTRICAL SYSTEM 121
Preparatory work
– Switch off all power consumers and switch off the engine.
– Remove the headlight mask with the headlight. ( p. 117)
600610-10
Main work
– Pull off connector 1.
– Take off protection cap 2 of the headlight bulb.
600611-10
– Detach spring bar 3.
– Remove headlight bulb 4.
– Insert a new headlight bulb into the headlight housing.
Headlight (H4 / socket P43t) ( p. 166)
– Fix the headlight bulb in the headlight using the spring bar.
– Mount the protection cap. Attach the connector.
Finishing work
– Install the headlight mask with the headlight. ( p. 119)
– Check the headlight setting. ( p. 124)