17 SERVICE WORK ON THE ENGINE 143
100206-10
– Remove screw plug 3 with oil screen 4 and the O-rings.
– Completely drain the remaining engine oil.
– Thoroughly clean the parts and sealing area.
100207-10
– Position oil screen 2 with the O-rings.
– Mount and tighten screw plug 1 with the O-ring.
Guideline
Plug, oil screen M20x1.5 15 Nm
(11.1 lbf ft)
100208-10
– Position oil screen 4 with the O-rings.
– Mount and tighten screw plug 3 with the O-ring.
Guideline
Plug, oil screen M20x1.5 15 Nm
(11.1 lbf ft)
To Next Page
Loading...
